OneView™ v4.3.1-126 – Optigo Networks

Upgrade Procedure

To upgrade the OneView™ software on your ONS-NC600, please carefully follow the upgrade instructions or contact Optigo Networks at support@optigo.net or 1-800-629-6559 for assistance.

WARNING

If your OneView system's 'Factory Default Version' is older than 4.2.0-065, please contact Optigo tech support for assistance before you attempt to upgrade your system.

Downloads

To download, click → OneView Software v4.3.1-126

Filename: ons-nc600-fw-4.3.1-126.optg

SHA256 checksum: 8ce26c3c6b4979ff5dcee6ea2474a7f77537d6fd7d0466e21bc185490d4eec51

New Features & Improvements

Email notifications for system events.
Spanning Tree, FEC, and data collection.
Spanning tree state changes displayed when data collection is enabled.

Known Issues & Limitations

Plugging in or unplugging Ethernet cables from an ONS-CU-SFP can sometimes result in multiple system notifications appearing on the Notifications screen.
Workaround: Just ignore these.
Changing port VLANs occasionally throws an error (Spectra Only).
Workaround: Re-attempt VLAN change.
Some downstream traffic does not pass on VLAN 1 with ONS-C801pi and ONS-C1601pi (Spectra Only).
Workaround: Use a VLAN other than 1.
Notifications on the Windows version of Chrome do not work when using "http".
Workaround: Always use "https" (e.g. https://192.168.10.254).
If data traffic (non-management) can reach the Network Controller, then an excessive amount of broadcast (DoS) may cause performance issues with the GUI (OneView).
Workaround: Use a unique VLAN for management (OneView).
Inter-switch traffic on the same EPON (laser) does not increment traffic counters on bandwidth page (Spectra Only).
The ONS-C4801p in Hybrid mode can cause issues with the topology view.

New and Updated Documentation

The following is a list of documents that have been updated or newly created to support this release of OneView software: