OneView™ v4.5.0-207

STOP!
Before you update your OneView software to version 4.5.0-207, please make sure you've purchased the appropriate license(s) for your system. If in doubt, please contact Optigo tech support first.

 

Upgrade Procedure

To upgrade the OneView™ software on your ONS-NC600, please carefully follow the upgrade instructions or contact Optigo Networks at [e-mail] or 1-800-629-6559 for assistance.

 

WARNING

If your OneView system's 'Factory Default Version' is older than 4.2.0-065, please contact Optigo tech support for assistance before you attempt to upgrade your system.

Downloads

To download, click → OneView Software v4.5.0-207

Filename: ons-nc600-fw-4.5.0-207.optg

SHA256 checksum: 51ca11238c299a35918a1f016e2437384fe60bc4148736392062f099aedc82d9


New Features & Improvements

• Added user adjustable licensing for smoother upgrades and expansion.
  
  
• Various bug fixes and stability improvements.

Known Issues & Limitations

• ONS-C2401p switches with MAC addresses starting with '88:DC:96' (see label on the bottom of the switch) may fail to register the first time they're connected to the system.
  Workaround: Disconnect the switch, delete it from the 'Edge Switches' page, add it manually, and then reconnect the switch.
  
  
• When used as the Aggregation switch on Hybrid systems, ONS-C2401p switches with MAC addresses starting with '88:DC:96' (see label on the bottom of the switch) may fail to get recognized the first time they're connected to the ONS-NC600.
  Workaround 1: Follow the Revert Procedure to roll your system software back to the previous version of OneView and then upgrade to v4.4.3-188 (if your system's previous version is older than that).
  Workaround 2: Contact Optigo tech support for assistance.
  
  
• Attempting to change a port's PoE status from the 'Edge Switches > More' page or the 'Switches & Routers > More' page fails.
  Workaround: Change the port's PoE status from the 'Ports' page.
  
  
• Plugging in or unplugging Ethernet cables from an ONS-CU-SFP can result in duplicate link notifications appearing on the Notifications screen. 
  Workaround: Ignore these - the Edge Switch itself is sending this.
  
  
• Changing port VLANs occasionally throws an error (Spectra Only).
  Workaround: Re-attempt VLAN change.
  
  
• Some downstream traffic does not pass on VLAN 1 with ONS-C801pi and ONS-C1601pi (Spectra Only).
  Workaround: Use a VLAN other than 1.
  
  
• If data traffic (non-management) can reach the Network Controller, then an excessive amount of broadcast (DoS) may cause performance issues with the GUI (OneView).
  Workaround: Use a unique VLAN for management (OneView).
  
  
• Inter-switch traffic on the same EPON (laser) does not increment traffic counters on bandwidth page (Spectra Only).
  
  
• The ONS-C4801p in Hybrid mode can cause issues with the topology view.