OneView™ v4.4.3-188

Upgrade Procedure

To upgrade the OneView™ software on your ONS-NC600, please carefully follow the upgrade instructions or contact Optigo Networks at [e-mail] or 1-800-629-6559 for assistance.

 

WARNING

If your OneView system's 'Factory Default Version' is older than 4.2.0-065, please contact Optigo tech support for assistance before you attempt to upgrade your system.

Downloads

To download, click → OneView Software v4.4.3-188

Filename: ons-nc600-fw-4.4.3-188.optg

SHA256 checksum: 2440328321048fa7e582ca008d79fd207998cec19f49cd4300f856580d39cb63


New Features & Improvements

• Fixed a bug where restoring a OneView configuration with 128 VLANS (the maximum amount) would cause the system to be unusable.
  
  
• Fixed stability issue in redundancy with data collection enabled.

Known Issues & Limitations

• Plugging in or unplugging Ethernet cables from an ONS-CU-SFP can result in duplicate link notifications appearing on the Notifications screen. 
  Workaround: Ignore these - the Edge Switch itself is sending this.
  
  
• Changing port VLANs occasionally throws an error (Spectra Only).
  Workaround: Re-attempt VLAN change.
  
  
• Some downstream traffic does not pass on VLAN 1 with ONS-C801pi and ONS-C1601pi (Spectra Only).
  Workaround: Use a VLAN other than 1.
  
  
• Notifications on the Windows version of Chrome do not work when using "http". This also affects the redundancy connection status which relies on the notification mechanism.
  Workaround: Always use "https" (e.g. https://192.168.10.254).
  
  
• If data traffic (non-management) can reach the Network Controller, then an excessive amount of broadcast (DoS) may cause performance issues with the GUI (OneView).
  Workaround: Use a unique VLAN for management (OneView).
  
  
• Inter-switch traffic on the same EPON (laser) does not increment traffic counters on bandwidth page (Spectra Only).
  
  
• The ONS-C4801p in Hybrid mode can cause issues with the topology view.