OneView™ v4.5.2-227

IMPORTANT
If you're upgrading from version 4.4.3-188 (or older), please make sure you've purchased the appropriate license(s) for your system. If in doubt, please contact Optigo tech support first.

Upgrade Procedure

To upgrade the OneView™ software on your ONS-NC600, please carefully follow the upgrade instructions or contact Optigo Networks at [e-mail] or 1-800-629-6559 for assistance.

Downloads

To download, click → OneView Software v4.5.2-227

Filename: ons-nc600-fw-4.5.2-227.optg

SHA256 checksum: 50e6b5cf32ae272c2f6be5e299391b49b6aa8383775c67a1d06d4bf196aee8f5


New Features & Improvements

• Added support for ONS-CR2440XP 24-Port PoE edge switch.
  
  
• Miscellaneous bug fixes and stability improvements.

Known Issues & Limitations

• MAC authorization (e.g. OneClick Secure) has limited traffic blocking capabilities on ONS-CR2440XP edge switches running version 8.40.1981 (or older) firmware.
  Workaround: Upgrade the switch's firmware as soon as it becomes available (TBD).
  
  
• Plugging in or unplugging Ethernet cables from an ONS-CU-SFP can result in duplicate link notifications appearing on the Notifications screen. 
  Workaround: Ignore these - the Edge Switch itself is sending this.
  
  
• Changing port VLANs occasionally throws an error (Spectra Only).
  Workaround: Re-attempt VLAN change.
  
  
• Some downstream traffic does not pass on VLAN 1 with ONS-C801pi and ONS-C1601pi (Spectra Only).
  Workaround: Use a VLAN other than 1.
  
  
• VLAN 1 traffic in Spectra mode does not reach an Optigo-managed router
  Workaround: Use a VLAN other than 1. 
  
  
• If data traffic (non-management) can reach the Network Controller, then an excessive amount of broadcast (DoS) may cause performance issues with the GUI (OneView).
  Workaround: Use a unique VLAN for management (OneView).
  
  
• Inter-switch traffic on the same EPON (laser) does not increment traffic counters on bandwidth page (Spectra Only).
  
  
• The ONS-C4801p in Hybrid mode can cause issues with the topology view.