Upgrade Procedure
To upgrade the OneView™ software on your ONS-NC600, please carefully follow the upgrade instructions or contact Optigo Networks at support@optigo.net or 1-800-629-6559 for assistance.
To upgrade the OneView™ software on your ONS-NC600, please carefully follow the upgrade instructions or contact Optigo Networks at support@optigo.net or 1-800-629-6559 for assistance.
WARNING
If your OneView system's 'Factory Default Version' is older than 4.2.0-065, please contact Optigo tech support for assistance before you attempt to upgrade your system.
Filename: ons-nc600-fw-4.4.2-186.optg
SHA256 checksum: 2111d2d0e98374515666838215f7bbc7185fd8c59ded2118c13cbfa9b008b944
New Features & Improvements
New Features & Improvements
- Added support for up to 128 unique VLANs.
- DNS name resolution bug fixed.
- Miscellaneous GUI bugs fixed.
Known Issues & Limitations
- Restoring a OneView configuration with 128 VLANS (the maximum amount) will cause the system to be unusable.
Workaround: Do not configure your OneView system with more than 127 VLANs. - Plugging in or unplugging Ethernet cables from an ONS-CU-SFP can result in duplicate link notifications appearing on the Notifications screen.
Workaround: Ignore these - the Edge Switch itself is sending this. - Changing port VLANs occasionally throws an error (Spectra Only).
Workaround: Re-attempt VLAN change. - Some downstream traffic does not pass on VLAN 1 with ONS-C801pi and ONS-C1601pi (Spectra Only).
Workaround: Use a VLAN other than 1. - Notifications on the Windows version of Chrome do not work when using "http". This also affects the redundancy connection status which relies on the notification mechanism.
Workaround: Always use "https" (e.g. https://192.168.10.254). - If data traffic (non-management) can reach the Network Controller, then an excessive amount of broadcast (DoS) may cause performance issues with the GUI (OneView).
Workaround: Use a unique VLAN for management (OneView). - Inter-switch traffic on the same EPON (laser) does not increment traffic counters on bandwidth page (Spectra Only).
- The ONS-C4801p in Hybrid mode can cause issues with the topology view.
Updated Documentation
The following documents have been updated to support this release of OneView software:
Comments
0 comments
Please sign in to leave a comment.