OneView™ v4.4.0-164

Upgrade Procedure

To upgrade the OneView™ software on your ONS-NC600, please carefully follow the upgrade instructions or contact Optigo Networks at [e-mail] or 1-800-629-6559 for assistance.

 

WARNING

If your OneView system's 'Factory Default Version' is older than 4.2.0-065, please contact Optigo tech support for assistance before you attempt to upgrade your system.

Downloads

To download, click → OneView Software v4.4.0-164

Filename: ons-nc600-fw-4.4.0-164.optg

SHA256 checksum: 6925746c60348d7df5454dab9e559f1a849003283bdeea9aae53fb79a660c2da


New Features & Improvements

• Router management for supported routers.
  
  
• Added support for up to 10000 reserved DHCP addresses.
  
  
• Fixed a bug where named VLANs were not auto-created when adding a new VLAN ID to an aggregation switch port.

Known Issues & Limitations

• A GUI bug in the 'Inter-VLAN Routing' table results in the selection dialog moving down the page when the table starts to get large enough to require scrolling. 
  Workaround: Keep track of it on the page as you add VLANs and avoid scrolling the 'Inter-VLAN Routing' table when possible.
  
  
• Plugging in or unplugging Ethernet cables from an ONS-CU-SFP can result in duplicate link notifications appearing on the Notifications screen. 
  Workaround: Ignore these - the Edge Switch itself is sending this
  
  
• Changing port VLANs occasionally throws an error (Spectra Only).
  Workaround: Re-attempt VLAN change.
  
  
• Some downstream traffic does not pass on VLAN 1 with ONS-C801pi and ONS-C1601pi (Spectra Only).
  Workaround: Use a VLAN other than 1.
  
  
• Notifications on the Windows version of Chrome do not work when using "http".
  Workaround: Always use "https" (e.g. https://192.168.10.254).
  
  
• If data traffic (non-management) can reach the Network Controller, then an excessive amount of broadcast (DoS) may cause performance issues with the GUI (OneView).
  Workaround: Use a unique VLAN for management (OneView).
  
  
• Inter-switch traffic on the same EPON (laser) does not increment traffic counters on bandwidth page (Spectra Only).
  
  
• The ONS-C4801p in Hybrid mode can cause issues with the topology view.

New and Updated Documentation

The following is a list of documents that have been updated or newly created to support this release of OneView software:

• Connect OneView™ User Guide
  
  
• Router Management with OneView™
  
  
• OneView™ Supported Routers