How can I connect to OneView after I misconfigured the network settings?

This guide should be used if you have misconfigured your settings and lost network access to the ONS-NC600. It is not recommended to use the method described in this guide for long term OneView access.

1. Ensure the ONS-NC600 is powered on

Wait until the LCD display is functioning before proceeding.

2. Connect a computer to the ONS-NC600

Connect an Ethernet cable between one of your PC's interfaces and port 1 of the ONS-NC600. Make sure you know which interface you are using on your PC for the next step.

3. Configure your PC's network interface

Use the following network settings:

IP address	192.168.201.1
Subnet mask	255.255.255.0

4. Log into OneView

Using the Google Chrome browser, go to the address https://192.168.201.254. You can log into OneView from here with your usual credentials.

5. Correct your management network settings

Fix your management network settings so that you can regain access to OneView via the connection to the aggregation switch (as per the 'Initial OneView™ Setup' guides for Spectra or Hybrid).